Basic Information
HUSQVARNA 394XP | ||
---|---|---|
Model name: | 394XP | |
Engine size: | 94 | cc |
Power output: | 7.0 5.2 | hp kW |
Weight (powerhead): | 17.4 7.9 | lb. kg |
Bar length: | 18″…36″ | |
Chain pitch: | 3/8″ (.404″) | |
Bar mount: | Large |
Compatible Bars
Husqvarna bars (3/8″)
The Husqvarna 394XP takes all Husqvarna guide bars with the Large mount, 3/8″ pitch and .058″ or .063″ gauge (.050″ fits too, although not specified). The compatible original bars are listed in the three tables below. Recommended bar lengths are 18″ to 36″; too short bars greyed out.
A quick selection guide: the X-Force XF-388 bars are lightweight affordable bars and great for occasional use. For heavy-duty use, the solid HT-380 and HT-388 bars with replaceable noses will give the longest service life. X-Tough Light bars are great but more expensive and harder to find, at least yet.
HUSQVARNA BARS Large mount 3/8″ pitch .050″ gauge (not spec) | Chains: C83 Lengths in. (DL)* |
---|---|
HT-380 Pro RSN · Solid bar · Replaceable nose | 16″(60)l,p,e 18″(68)d,l,p,e 20″(72)d,l,g,p,e 24″(84)c,j,p,e 28″(93)c,p 32″(105)j,l,p |
X-Tough Light · Long pro bars · Lightweight · Replaceable nose | 24″(84)c,j,p,e 28″(93)c,p 32″(105)j,l,p 36″(115) |
*links to Amazon: bar(ch.n)(opt)Oreg.ch | (c)CJ (d)V (g)LGX (j)EXJ (l)EXL (p,e)LPX |
HUSQVARNA BARS Large mount – 3/8″ pitch .058″ gauge | Chains: C85 Lengths in. (DL)* |
---|---|
HT-388 Pro RSN · Solid bar · Replaceable nose | 16″(60)EXL 18″(68)l,g,p 20″(72)j,l,g,p 24″(84)j,l,p 28″(93)EXL 32″(105) 36″(115)EXJ |
XF-388 · X-Force · Laminated · Lightweight · Sealed bearing | C85/H81 16″(60)EXL 18″(68)l,g,p 20″(72)j,l,g,p |
*links to Amazon: bar(ch.n)(opt)Oreg.ch | (g)LGX (j)EXJ (l)EXL (p)LPX |
HUSQVARNA BARS Large mount – 3/8″ pitch .063″ gauge | Chains: H83 Lengths in. (DL)* |
---|---|
HA-383 Pro Solid · Solid bar · Hard nose | 24″(84)l,g |
HT-383 Pro RSN · Solid bar · Replaceable nose | 24″(84)l,g 28″(93) 32″(105)j 36″(115)c,j |
X-Tough Light · Long pro bars · Lightweight · Replaceable nose | 32″(105)j 36″(115)c,j |
*links to Amazon: bar(ch.n)(opt)Oreg.ch | (c)CJ (g)LGX (j)EXJ (l)EXL |
Husqvarna bars (.404″)
When fitted with a .404″ drive sprocket, the 394XP takes Husqvarna bars with the Large mount, .404″ pitch and .063″ gauge. These bars are listed in the table below; the models longer than 36″ are too heavy for the 394XP to run (greyed out).
HUSQVARNA BARS Large mount – .404″ pitch .063″ gauge | Lengths in. (DL) |
---|---|
HT-343 Pro RSN · Solid bar · Replaceable nose | 32″ 36″ |
HTR-343 Pro RSN · Very long pro bars · Titanium roller · Replaceable nose | 44″ 60″ 72″ |
Oregon bars (3/8″)
Oregon makes a large number of Husqvarna 394XP -compatible guide bars in the D009 mount, 3/8″ pitch and both in .050″ and .058″ gauges. These bars are listed in the two tables below. Models shorter than the minimum recommended length for the 394XP are greyed out.
The AdvanceCut™ (SFH) bars (.050″ or .058″) are probably the best choice for the occasional use, while the replaceable-nose PowerCut™ (EXLD/RND) bars give the longest service life in heavy use.
OREGON BARS D009 mount 3/8″ pitch .050″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (SFH) · Standard bar | 20″(72c,d,e,g,j) 24″(84e,j,c) |
DuraCut™ (ATM/DXLM) · Hard nose · Tough, hard-wearing · Dirty conditions | ATM: 16″(60e,l) 20″(72c,d,e,g,j) 24″(84e,j,c) DXLM: 20″(72c,d,e,g,j) 24″(84e,j,c) |
PowerCut™ (EXLD/RND) · Replaceable nose · Solid body · Large nose · 72E/J/L chain | EXLD: 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) 28″(93c,j) 30″(98) 32″(105e,j) RND: 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) 28″(93c,j) 30″(98) 32″(105e,j) |
VersaCut™ (VXLH) · Light pro bar · Large nose · 72DPX chain | 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) |
*links to Amazon: bar(chain)(b&c) | (c)CJ,(d)D,(e)EXL, (g)LGX,(j)EXJ |
OREGON BARS D009 mount 3/8″ pitch .058″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (SFH) · Standard bar | 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) |
DuraCut™ (ATM/DXLM) · Hard nose · Tough, hard-wearing · Dirty conditions | ATM: 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) 28″(92) DXLM: 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) 28″(92) 30″(98) |
PowerCut™ (EXLD/RND) · Replaceable nose · Solid body · Large nose · 73E/J/L chain RND: 13″(52) 15″(56) 16″(60) 17″(64) 18″(68g,j,l) 20″(72g,j,l) 22″(76) 24″(84j,l) | EXLD: 13″(52) 15″(56) 16″(60) 17″(64) 18″(68g,j,l) 22″(76) 24″(84j,l) 26″(89) 28″(92) 30″(102) 32″(105) 36″(115) |
VersaCut™ (VXLH) · Lightweight pro bar · Large nose · 73E/J/L chain | 15″(56) 16″(60) 17″(64) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) |
*links to Amazon: bar(chain)(b&c) | (g)LGX,(j)EXJ, (l)EXL |
Oregon bar (.404″)
When fitted with a .404″ drive sprocket, the 394XP takes Oregon bars with the D009 mount, .404″ pitch and .063″ gauge. These bars are listed in the table below.
The replaceable-nose PowerCut™ (EXLF/RNF) bars are the right choice for most applications. The hard-nose DuraCut™ models should be preferred in very dirty butgive the longest service life in heavy use.
OREGON BARS D009 mount .404″ pitch | Lengths in. (DL) | |
---|---|---|
.404″ – .063″: | ||
DuraCut™ (ATL) · Hard nose · Tough, hard-wearing · Dirty conditions | 28″ (84) 30″ (92) 34″ (100) | |
DuraCut™ XD (New models) · Hard nose · Tough, hard-wearing · Dirty conditions | DXLL: 24″ (76) 28″ (84) 30″ (92) 34″ (100) 36″ (104) | DXLM: 24″ (76) 28″ (84) |
PowerCut™ · Replaceable nose · Solid body · Large nose | EXLF: 24″ (76) 36″ (104) 42″ (122) | RNF: 24″ (76) 36″ (104) 42″ (122) |