Husqvarna 535i XP Saw Profile

Basic Information

HUSQVARNA
535i XP
Model name:535iXP
Battery voltage:40V
Weight
(w/o battery, bar):
5.29
2.4
lb.
kg
Bar length:10″…14″
Chain pitch:.325″ Mini
(3/8″ Mini)
Bar mount:Small

Compatible Bars

Husqvarna 535i XP is typically shipped with a .325″ Mini -pitch drive sprocket and cutting equipment, but can also be fitted with a 3/8″ Mini sprocket, bar and chain. Compatible bars are listed below separately for either pitch option.

Husqvarna original bars (.325″ Mini)

With a .325″ Mini pitch drive sprocket (stock option), the Husqvarna 535i XP takes Husqvarna bars with the Small mount, .325″ Mini pitch and .043″ gauge. The compatible original bars are from the X-Precision line and are listed in the table below. Recommended lengths are 10″ to 14″; the 16″ version is compatible but likely too heavy for the 535i XP to run.

HUSQVARNA BARS
Small mount

.325″ Mini pitch
.043″ gauge
Lengths
in. (DL)
X-Precision
· Laminated
· Narrow kerf (Pixel)
· SP21G chain
SP21G
12″ (51)
14″ (59)
16″ (64)

Oregon bars (.325″ Low Profile)

With a .325″ Mini pitch drive sprocket, the Husqvarna 535i XP takes Oregon bars with the Small mount, .325″ Low Profile pitch and .043″ gauge. The compatible bars are from the narrow-kerf, low profile SpeedCut™ Nano line and are listed in the table below.

OREGON BARS
A095 mount
.325″LP pitch
.043″ gauge
Lengths
in. (DL)
SpeedCut™ Nano (TXLN)
∙ Narrow kerf
80TXL chain

10″ (46)
12″ (51)
14″ (59)
16″ (64)

Husqvarna original bars (3/8″ Mini)

With a 3/8″ Mini pitch drive sprocket, the Husqvarna 535i XP takes all Husqvarna guide bars with the Small mount, 3/8 Mini pitch and .043″ gauge. The thicker .050″ gauge should work too, though not specified by Husqvarna for the saw. The compatible original bars are listed in the table below.

HUSQVARNA BARS
Small mount

3/8″ Mini pitch
Lengths
in. (DL)
.043″ gauge:
HL-186
· Laminated
· Narrow kerf (Pixel)
· H38 chain
H38
12″ (45)
14″ (52)
16″ (56)
.050″ gauge (not spec):
HL-280
· Laminated
· S93G chain

S93G
10″ (40)
12″ (45)
14″ (52)
16″ (56)

Oregon bars (3/8″ Low Profile)

With a 3/8″ Mini pitch drive sprocket, the Husqvarna 535i XP takes Oregon guide bars in the A095 mount, 3/8 Low Profile pitch and both .043″ and .050″ gauge. Recommended lengths are 10″ to 14″; other lengths greyed out.

OREGON BARS
A095 mount
3/8″LP pitch
Lengths
in. (DL)
3/8″LP – .043″:90PX
Single Rivet (MLEA)
Affordable
90PX chain
12″ (45)
3/8″LP – .050″:91PX
AdvanceCut™ (SXE)
(recommended)
Tougher nose
91PX chain
12″ (45)
14″ (52)
16″ (56)
Single Rivet (SDE)
Affordable
91PX chain
12″ (45)
14″ (52)
16″ (56)
18″ (60)