Husqvarna 540i XP Saw Profile

Basic Information

HUSQVARNA
540i XP
Model name:540iXP
Battery voltage:40V
Weight
(w/o battery, bar):
6.39
2.9
lb.
kg
Bar length:12″…16″
Chain pitch:.325″ Mini
(3/8″ Mini)
Bar mount:Small

Compatible Bars

Husqvarna 540i XP is typically shipped with a .325″ Mini -pitch drive sprocket and cutting equipment, but can also be fitted with a 3/8″ Mini sprocket, bar and chain. Compatible bars are listed below separately for either pitch option.

Husqvarna original bars (.325″ Mini)

With a .325″ Mini pitch drive sprocket (stock option), the Husqvarna 540i XP takes Husqvarna bars with the Small mount, .325″ Mini pitch and .043″ gauge. The compatible original bars are from the X-Precision line and are listed in the table below.

HUSQVARNA BARS
Small mount

.325″ Mini pitch
.043″ gauge
Lengths
in. (DL)
X-Precision
· Laminated
· Narrow kerf (Pixel)
· SP21G chain
SP21G
12″ (51)
14″ (59)
16″ (64)

Oregon bars (.325″ Low Profile)

With a .325″ Mini pitch drive sprocket, the Husqvarna 540i XP takes Oregon bars with the Small mount, .325″ Low Profile pitch and .043″ gauge. The compatible bars are from the narrow-kerf, low profile SpeedCut™ Nano line and are listed in the table below.

OREGON BARS
A095 mount
.325″LP pitch
.043″ gauge
Lengths
in. (DL)
SpeedCut™ Nano (TXLN)
∙ Narrow kerf
80TXL chain

10″ (46)
12″ (51)
14″ (59)
16″ (64)

Husqvarna original bars (3/8″ Mini)

When fitted with a 3/8″ Mini pitch drive sprocket, the Husqvarna 540i XP takes all Husqvarna guide bars with the Small mount, 3/8 Mini pitch and .050″ gauge – .043″ gauge should go too, though not specified by Husqvarna for the saw. The compatible original bars are listed in the table below.

HUSQVARNA BARS
Small mount

3/8″ Mini pitch
Lengths
in. (DL)
.050″ gauge:
HL-280
· Laminated
· S93G chain

S93G
10″ (40)
12″ (45)
14″ (52)
16″ (56)
.043″ gauge (not spec):
HL-186
· Laminated
· Narrow kerf (Pixel)
· H38 chain
H38
12″ (45)
14″ (52)
16″ (56)

Oregon bars (3/8″ Low Profile)

When fitted with a 3/8″ Mini pitch drive sprocket, the Husqvarna 540i XP takes Oregon guide bars in the A095 mount, 3/8 Low Profile pitch and both .043″ and .050″ gauge.

OREGON BARS
A095 mount
3/8″LP pitch
Lengths
in. (DL)
3/8″LP – .043″:90PX
Single Rivet (MLEA)
Affordable
90PX chain
12″ (45)
3/8″LP – .050″:91PX
AdvanceCut™ (SXE)
(recommended)
Tougher nose
91PX chain
12″ (45)
14″ (52)
16″ (56)
Single Rivet (SDE)
Affordable
91PX chain
12″ (45)
14″ (52)
16″ (56)
18″ (60)