Basic Information
HUSQVARNA 575XP | ||
---|---|---|
Model name: | 575XP | |
Engine size: | 73.5 | cc |
Power output: | 5.5 4.0 | hp kW |
Weight (powerhead): | 14.9 6.8 | lb. kg |
Bar length: | 16″…32″ | |
Chain pitch: | 3/8″ | |
Bar mount: | Large |
Compatible Bars
Husqvarna original bars
The Husqvarna 575XP takes all Husqvarna guide bars with the Large mount, 3/8″ pitch and .050″ or .058″ gauge (.063″ fits too, although not specified). The compatible original bars are listed in the three tables below. Recommended bar lengths are 16″ to 32″; other lengths greyed out.
A quick selection guide: the X-Force XF-388 bars are lightweight affordable bars and great for occasional use. For heavy-duty use, the solid HT-380 and HT-388 bars with replaceable noses will give the longest service life. X-Tough Light bars are great but more expensive and harder to find, at least yet.
HUSQVARNA BARS Large mount – 3/8″ pitch .050″ gauge | Chains: C83 Lengths in. (DL) |
---|---|
HT-380 Pro RSN · Solid bar · Replaceable nose | 16″ (60) 18″ (68) 20″ (72) 24″ (84) 28″ (93) 32″ (105) |
X-Tough Light · Long pro bars · Lightweight · Replaceable nose | 24″ (84) 28″ (93) 32″ (105) 36″ (115) |
HUSQVARNA BARS Large mount – 3/8″ pitch .058″ gauge | Chains: C85 Lengths in. (DL) |
---|---|
HT-388 Pro RSN · Solid bar · Replaceable nose | 16″ (60) 18″ (68) 20″ (72) 24″ (84) 28″ (93) 32″ (105) 36″ (115) |
XF-388 · X-Force · Laminated · Lightweight · Sealed bearing | C85/H81 16″ (60) 18″ (68) 20″ (72) |
HUSQVARNA BARS Large mount – 3/8″ pitch .063″ gauge (not spec) | Chains: H83 Lengths in. (DL) |
---|---|
HA-383 Pro Solid · Solid bar · Hard nose | 24″ (84) |
HT-383 Pro RSN · Solid bar · Replaceable nose | 24″ (84) 28″ (93) 32″ (105) 36″ (115) |
X-Tough Light · Long pro bars · Lightweight · Replaceable nose | 32″ (105) 36″ (115) |
Oregon bars
Oregon makes a large number of Husqvarna 575XP -compatible guide bars in the D009 mount, 3/8″ pitch and both in .050″ and .058″ gauges. These bars are listed in the two tables below. Models too long for the 575XP to run are greyed out.
The AdvanceCut™ (SFH) bars (.050″ or .058″) are probably the best choice for the occasional use, while the replaceable-nose PowerCut™ (EXLD/RND) bars give the longest service life in heavy use.
OREGON BARS D009 mount 3/8″ pitch .050″ gauge | Lengths in. (DL) | |
---|---|---|
AdvanceCut™ (recommended, light-duty) · Standard bar | SFH: 20″ (72) 24″ (84) | |
DuraCut™ · Hard nose · Tough, hard-wearing · Dirty conditions | ATM: 16″ (60) 20″ (72) 24″ (84) | DXLM: 20″ (72) 24″ (84) |
PowerCut™ (recommended, heavy-duty) · Replaceable nose · Solid body · Large nose · 72E/J/L chain | EXLD: 16″ (60) 18″ (68) 20″ (72) 24″ (84) 28″ (93) 30″ (98) 32″ (105) | RND: 16″ (60) 18″ (68) 20″ (72) 24″ (84) 28″ (93) 30″ (98) 32″ (105) |
VersaCut™ (VXLH) · Light pro bar · Large nose · 72DPX chain | 16″ (60) 18″ (68) 20″ (72) 24″ (84) |
OREGON BARS D009 mount 3/8″ pitch .058″ gauge | Lengths in. (DL) | |
---|---|---|
AdvanceCut™ (SFH) (recommended, light-duty) · Standard bar | 16″ (60) 18″ (68) 20″ (72) 24″ (84) | |
DuraCut™ · Hard nose · Tough, hard-wearing · Dirty conditions | ATM: 16″ (60) 18″ (68) 20″ (72) 24″ (84) 28″ (92) | DXLM: 16″ (60) 18″ (68) 20″ (72) 24″ (84) 28″ (92) 30″ (98) |
PowerCut™ (recommended, heavy-duty) · Replaceable nose · Solid body · Large nose · 73E/J/L chain | EXLD: 13″ (52) 15″ (56) 16″ (60) 17″ (64) 18″ (68) 22″ (76) 24″ (84) 26″ (89) 28″ (92) 30″ (102) 32″ (105) 36″ (115) | RND: 13″ (52) 15″ (56) 16″ (60) 17″ (64) 18″ (68) 20″ (72) 22″ (76) 24″ (84) |
VersaCut™ (VXLH) · Lightweight pro bar · Large nose · 73E/J/L chain | 15″ (56) 16″ (60) 17″ (64) 18″ (68) 20″ (72) 24″ (84) |