Basic Information
HUSQVARNA T525 | ||
---|---|---|
Model name: | T525 | |
Engine size: | 27.0 | cc |
Power output: | 1.48 1.10 | hp kW |
Weight (powerhead): | 6.0 2.7 | lb. kg |
Bar length: | 10″…12″ | |
Chain pitch: | 3/8″ Mini | |
Bar mount: | Small |
Compatible Bars
Compatible original Husqvarna guide bars and Oregon replacement bars are listed in tables below. A link to the bar, compatible Husqvarna and Oregon chains and a bar&chain combo in Amazon are included whenever possible. (Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.)
Husqvarna original bars
The Husqvarna T525 takes all Husqvarna guide bars with the Small mount, 3/8 Mini pitch and .050″ gauge. The .043″ gauge HL-186 bars should also fit though not specified by Husqvarna. The compatible original bars are listed in the table below. Recommended bar lengths are 10″ to 12″, compatible bars outside this range greyed out.
HUSQVARNA BARS Small mount 3/8″ Mini pitch | Lengths in. (DL)* |
---|---|
.043″ gauge (not spec): | |
HL-186 · Laminated · Narrow kerf (Pixel) · H38 chain | H38 12″(45)px,r 14″(52)px,r 16″(56)px |
.050″ gauge: | |
HL-280 · Laminated · S93G chain | S93G 10″(40)vxl 12″(45)p,l,v 14″(52)p,l,v,s 16″(56)(b,c)p,l,v,s |
*links to Amazon: bar(ch.n)(opt)Oreg.ch | (p,r,s)PX (l)PXL (v)VXL |
Oregon bars
Oregon makes Husqvarna T525 -compatible guide bars in the A095 mount, 3/8 Low Profile pitch and both .043″ and .050″ gauge. Compatible bars are listed in the table below. NB. Most of the bars are actually too long for the low-power T525 to run and are greyed out.
OREGON BARS A095 mount 3/8″LP pitch | Lengths in. (DL)* |
---|---|
3/8″LP – .043″: | |
Single Rivet (MLEA) ∙ Affordable ∙ 90PX chain | 12″(45r) |
3/8″LP – .050″: | |
AdvanceCut™ (SXE) ∙ Tougher nose ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) 16″(56 l,v) |
Single Rivet (SDE) ∙ Affordable ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) 16″(56 l,v) 18″(60 l,v) |
*links to Amazon: bar(chain)(b&c) | (r)PX (l)PXL (v)VXL |