Basic Information
HUSQVARNA T535i XP | ||
---|---|---|
Model name: | T535i | XP |
Battery voltage: | 40 | V |
Weight (w/o battery, bar): | 5.29 2.4 | lb. kg |
Bar length: | 10″…14″ | |
Chain pitch: | .325″ Mini (3/8″ Mini) | |
Bar mount: | Small |
Compatible Bars
Husqvarna T535i XP is typically shipped with a .325″ Mini -pitch drive sprocket and cutting equipment, but can also be fitted with a 3/8″ Mini sprocket, bar and chain. Compatible bars are listed below separately for either pitch option.
A link to the bar, compatible Husqvarna and Oregon chains and a bar&chain combo to Amazon are included whenever possible. (Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.)
Husqvarna original bars (.325″ Mini)
With a .325″ Mini pitch drive sprocket (stock option), the Husqvarna T535i XP takes Husqvarna bars with the Small mount, .325″ Mini pitch and .043″ gauge. The compatible original bars are from the X-Precision line and are listed in the table below. Recommended lengths are 10″ to 14″; the 16″ version is compatible but likely too heavy for the T535i XP to run.
HUSQVARNA BARS Small mount – .325″ Mini pitch .043″ gauge | Lengths in. (DL) |
---|---|
X-Precision · Laminated · Narrow kerf (Pixel) · SP21G chain | SP21G 12″ (51) 14″ (59) 16″ (64) |
Oregon bars (.325″ Low Profile)
With a .325″ Mini pitch drive sprocket, the Husqvarna T535i XP takes Oregon bars with the Small mount, .325″ Low Profile pitch and .043″ gauge. The compatible bars are from the narrow-kerf, low profile SpeedCut™ Nano line and are listed in the table below.
OREGON BARS A095 mount .325″LP pitch .043″ gauge | Lengths in. (DL) |
---|---|
SpeedCut™ Nano (TXLN) ∙ Narrow kerf ∙ 80TXL chain | 10″ (46) 12″ (51) 14″ (59) 16″ (64) |
Husqvarna original bars (3/8″ Mini)
With a 3/8″ Mini pitch drive sprocket, the Husqvarna T535i XP takes all Husqvarna guide bars with the Small mount, 3/8 Mini pitch and .043″ gauge. The thicker .050″ gauge should work too, though not specified by Husqvarna for the saw. The compatible original bars are listed in the table below.
HUSQVARNA BARS Small mount 3/8″ Mini pitch | Lengths in. (DL)* |
---|---|
.043″ gauge: | |
HL-186 · Laminated · Narrow kerf (Pixel) · H38 chain | H38 12″(45)px,r 14″(52)px,r (16″(56)px) |
.050″ gauge (not spec): | |
HL-280 · Laminated · S93G chain | S93G 10″(40)vxl 12″(45)p,l,v 14″(52)p,l,v,s (16″(56)(b,c)p,l,v,s) |
*links to Amazon: bar(ch.n)(opt)Oreg.ch | (p,r,s)PX (l)PXL (v)VXL |
Oregon bars (3/8″ Low Profile)
With a 3/8″ Mini pitch drive sprocket, the Husqvarna T535i XP takes Oregon guide bars in the A095 mount, 3/8 Low Profile pitch and both .043″ and .050″ gauge. Recommended lengths are 10″ to 14″; other lengths greyed out.
OREGON BARS A095 mount 3/8″LP pitch | Lengths in. (DL)* |
---|---|
3/8″LP – .043″: | |
Single Rivet (MLEA) ∙ Affordable ∙ 90PX chain | 12″(45r) |
3/8″LP – .050″: | |
AdvanceCut™ (SXE) ∙ Tougher nose ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) (16″(56 l,v)) |
Single Rivet (SDE) ∙ Affordable ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) (16″(56 l,v)) (18″(60 l,v)) |
*links to Amazon: bar(chain)(b&c) | (r)PX (l)PXL (v)VXL |