Husqvarna T540 XP II Saw Profile

Basic Information

HUSQVARNA
T540 XP II
Model name:T540XP II
Engine size:37.7cc
Power output:2.40
1.79
hp
kW
Weight
(powerhead):
8.6
3.9
lb.
kg
Bar length:12″…16″
Chain pitch:3/8″ Mini
(.325″ Mini)
Bar mount:Small

Compatible Bars

Husqvarna T540 XP® II is typically shipped with a 3/8″ Mini -pitch drive sprocket and cutting equipment, but can also be fitted with a .325″ Mini sprocket, bar and chain. Compatible bars are listed below separately for either pitch option.

Husqvarna original bars (3/8″ Mini)

When fitted with a 3/8″ Mini pitch drive sprocket (stock option), the Husqvarna T540 XP® II takes all Husqvarna guide bars with the Small mount, 3/8 Mini pitch and .050″ gauge – .043″ gauge should go too, though not specified by Husqvarna for the saw. The compatible original bars are listed in the table below. Recommended bar lengths are 12″ to 16″, compatible bars outside this range greyed out.

HUSQVARNA BARS
Small mount

3/8″ Mini pitch
Lengths
in. (DL)
.043″ gauge (not spec):
HL-186
· Laminated
· Narrow kerf (Pixel)
· H38 chain
H38
12″ (45)
14″ (52)
16″ (56)
.050″ gauge:
HL-280
· Laminated
· S93G chain

S93G
10″ (40)
12″ (45)
14″ (52)
16″ (56)

Oregon bars (3/8″ Low Profile)

When fitted with a 3/8″ Mini pitch drive sprocket (stock option), the Husqvarna T540 XP® II takes Oregon guide bars in the A095 mount, 3/8 Low Profile pitch and both .043″ and .050″ gauge. The Oregon .043″ narrow kerf chain (90PX) is specified for saws up to 42cc and OK for the T540, though only a single 12″ bar model is available in this gauge.

OREGON BARS
A095 mount
3/8″LP pitch
Lengths
in. (DL)
3/8″LP – .043″:90PX
Single Rivet (MLEA)
Affordable
90PX chain
12″ (45)
3/8″LP – .050″:91PX
AdvanceCut™ (SXE)
(recommended)
Tougher nose
91PX chain
12″ (45)
14″ (52)
16″ (56)
Single Rivet (SDE)
Affordable
91PX chain
12″ (45)
14″ (52)
16″ (56)
18″ (60)

Husqvarna original bars (.325″ Mini)

With a .325″ Mini pitch drive sprocket, the Husqvarna T540 XP® II takes Husqvarna bars with the Small mount, .325″ Mini pitch and .043″ gauge. The compatible original bars are from the X-Precision line and are listed in the table below.

HUSQVARNA BARS
Small mount

.325″ Mini pitch
.043″ gauge
Lengths
in. (DL)
X-Precision
· Laminated
· Narrow kerf (Pixel)
· SP21G chain
SP21G
12″ (51)
14″ (59)
16″ (64)

Oregon bars (.325″ Low Profile)

With a .325″ Mini pitch drive sprocket, the Husqvarna T540 XP® II takes Oregon bars with the Small mount, .325″ Low Profile pitch and .043″ gauge. The compatible bars are from the narrow-kerf, low profile SpeedCut™ Nano line and are listed in the table below.

OREGON BARS
A095 mount
.325″LP pitch
.043″ gauge
Lengths
in. (DL)
SpeedCut™ Nano (TXLN)
∙ Narrow kerf
80TXL chain
10″ (46)
12″ (51)
14″ (59)
16″ (64)