Basic Information
| HUSQVARNA T540i XP | ||
|---|---|---|
| Model name: | T540i | XP |
| Battery voltage: | 40 | V |
| Weight (w/o battery, bar): | 5.5 2.5 | lb. kg |
| Bar length: | 12″…16″ | |
| Chain pitch: | .325″ Mini (3/8″ Mini) | |
| Bar mount: | Small |
Compatible Bars
Husqvarna T540i XP is typically shipped with a .325″ Mini -pitch drive sprocket and cutting equipment, but can also be fitted with a 3/8″ Mini sprocket, bar and chain. Compatible bars are listed below separately for either pitch option.
A link to the bar, compatible Husqvarna and Oregon chains and a bar&chain combo to Amazon are included whenever possible. (Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.)
Husqvarna original bars (.325″ Mini)
With a .325″ Mini pitch drive sprocket (stock option), the Husqvarna T540i XP takes Husqvarna bars with the Small mount, .325″ Mini pitch and .043″ gauge. The compatible original bars are from the X-Precision line and are listed in the table below.
| HUSQVARNA BARS Small mount – .325″ Mini pitch .043″ gauge | Lengths in. (DL) |
|---|---|
| X-Precision · Laminated · Narrow kerf (Pixel) · SP21G chain | SP21G 12″ (51) 14″ (59) 16″ (64) |
Oregon bars (.325″ Low Profile)
With a .325″ Mini pitch drive sprocket, the Husqvarna T540i XP takes Oregon bars with the Small mount, .325″ Low Profile pitch and .043″ gauge. The compatible bars are from the narrow-kerf, low profile SpeedCut™ Nano line and are listed in the table below.
| OREGON BARS A095 mount .325″LP pitch .043″ gauge | Lengths in. (DL) |
|---|---|
| SpeedCut™ Nano (TXLN) ∙ Narrow kerf ∙ 80TXL chain | 10″ (46) 12″ (51) 14″ (59) 16″ (64) |
Husqvarna original bars (3/8″ Mini)
When fitted with a 3/8″ Mini pitch drive sprocket, the Husqvarna T540i XP takes all Husqvarna guide bars with the Small mount, 3/8 Mini pitch and .050″ gauge – .043″ gauge should go too, though not specified by Husqvarna for the saw. The compatible original bars are listed in the table below.
| HUSQVARNA BARS Small mount 3/8″ Mini pitch | Lengths in. (DL)* |
|---|---|
| .043″ gauge: | |
| HL-186 · Laminated · Narrow kerf (Pixel) · H38 chain | H38 12″(45)px,r 14″(52)px,r 16″(56)px |
| .050″ gauge (not spec): | |
| HL-280 · Laminated · S93G chain | S93G (10″(40)vxl) 12″(45)p,l,v 14″(52)p,l,v,s 16″(56)(b,c)p,l,v,s |
| *links to Amazon: bar(ch.n)(opt)Oreg.ch | (p,r,s)PX (l)PXL (v)VXL |
Oregon bars (3/8″ Low Profile)
When fitted with a 3/8″ Mini pitch drive sprocket, the Husqvarna T540i XP takes Oregon guide bars in the A095 mount, 3/8 Low Profile pitch and both .043″ and .050″ gauge.
| OREGON BARS A095 mount 3/8″LP pitch | Lengths in. (DL)* |
|---|---|
| 3/8″LP – .043″: | |
| Single Rivet (MLEA) ∙ Affordable ∙ 90PX chain | 12″(45r) |
| 3/8″LP – .050″: | |
| AdvanceCut™ (SXE) ∙ Tougher nose ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) 16″(56 l,v) |
| Single Rivet (SDE) ∙ Affordable ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) 16″(56 l,v) (18″(60 l,v)) |
| *links to Amazon: bar(chain)(b&c) | (r)PX (l)PXL (v)VXL |
