Oregon offers a very wide selection of quality aftermarket guide bars for Husqvarna chainsaws. Getting a hold of the Husqvarna-compatible Oregon offering is quite a challenge, mainly due to the tail mounts mix.
This article gives you an overview of the Oregon bars for Husqvarna in the form of handy tables. To make things real clear, the tables are organized by mount, pitch and gauge. I have also done you a favor by excluding bars that are only partly compatible (but which you’ll find on many mount charts).
You may also want to check my earlier article on Husqvarna bar sizes as well as my Husqvarna bar data page for lists of original Husqvarna bars. NEW: The compatible Oregon bars are listed for each Husqvarna saw model in my Husqvarna saw profiles.
Selection overview
The table below lists the Oregon bar codes that fit Husqvarna saws by mount, pitch and gauge. Detailed lists by mount further down.
Mount | Pitch | Gauge | Husqvarna saw models |
---|---|---|---|
A095 for Husq. Small | .325” Low Pro. | .043’’ | (Battery saws) 535i, T535i, 540i, T540i |
3/8” Low Pro. | .043’’ | (under 40cc/2hp) 120, 130, 135, 222, 240, T435, 439, T525, T540 XP |
|
.050’’ | |||
K095 for Husq. Small | .325” | .050” | (40...50cc/2...4 hp) 435, 440, 445, 450 Rancher, 545 Mark II, 550 XP |
.058” | |||
3/8” | .050” | (50...60cc/3...4 hp) 455 Rancher, 460 Rancher, 555 |
|
.058” | |||
D009 for Husq. Large | 3/8” | .050” | (60...100cc/5...8 hp) 365, 372 XP, 390 XP, 395 XP, 562 XP, 585, 592 XP |
.058” | |||
.404” | .063” | 3120 XP |
Oregon mounts for Husqvarna
The table below lists the Husqvarna bar mounts and a fully compatible Oregon bar mount. It also indicates which saw size class uses the mount.
MOUNTS Husqvarna mount | Oregon mount | Saw class |
---|---|---|
Small | A095 K095 | ~<60cc |
Large | D009 | ~>60cc |
Backstory: Oregon has tens of different bar mounts (tail mounts, mount patterns), but a few work perfect on Husqvarna saws: A095 and K095 go for a Husqvarna Small mount saw and D009 goes for Large mount saws.
There are also other “almost compatible” Oregon mounts that take a bit of rework. For clarity, they are not included here.
The Husqvarna-compatible Oregon bar models and lengths are listed in tables below. The tables are ordered by mount, pitch and gauge. I have also included a link to the bar (or a bar&chain combo) in Amazon where available. Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.
A095 for Husqvarna Small
Oregon has Husqvarna Small-compatible bars in the A074 mount in two chain pitches: .325″ Low Profile and 3/8 Low Profile, which match the .325″ Mini and 3/8″ Mini by Husqvarna.
.325″ Low Profile (A095)
The A095 mount, .325″ Low Profile -pitch Oregon bars fit battery-powered Husqvarna saws (535i, T535i, 540i, T540i). The bars are available in Oregon’s narrow-kerf SpeedCut™ Nano series, .043″ gauge and lengths from 10″ to 16″.
OREGON BARS A095 mount .325″LP pitch .043″ gauge | Lengths in. (DL) |
---|---|
SpeedCut™ Nano (TXLN) ∙ Narrow kerf ∙ 80TXL chain | 10″(46) 12″(51) 14″(59) 16″(64) |
3/8″ Low Profile (A095)
The A095 mount, 3/8″ Low Profile -pitch Oregon bars fit most Husqvarna’s small gas-powered models under 40cc or 2 hp (120, 130, 135, 222, T435, 439, T525, T540 XP). (See original Husqvarna bars)
OREGON BARS A095 mount 3/8″LP pitch | Lengths in. (DL)* |
---|---|
3/8″LP – .043″: | |
Single Rivet (MLEA) ∙ Affordable ∙ 90PX chain | 12″(45r) |
3/8″LP – .050″: | |
AdvanceCut™ (SXE) ∙ Tougher nose ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) 16″(56 l,v) |
Single Rivet (SDE) ∙ Affordable ∙ 91PX/PXL/VXL chain | 12″(45 l,v) 14″(52 l,v) 16″(56 l,v) 18″(60 l,v) |
*links to Amazon: bar(chain)(b&c) | (r)90PX (l)91PXL (v)91VXL |
K095 for Husqvarna Small
Oregon has a wide selection bars in the K095 mount for medium-powered 40cc to 60cc Husqvarna saws with the small mount and a .325″ or 3/8″ pitch chain.
.325″ pitch (K095)
The K095 mount, .325″ pitch Oregon bars fit many popular Husqvarna models: 435, 440, 445, 450 Rancher, 545 Mark II and 550 XP. These bars are available in .050″ and .058″ gauge (both work) and lengths from 13″ to 20″. The two tables below list the bars for both gauges. (See original Husqvarna bars)
OREGON BARS K095 mount .325″ pitch .050″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (MLB/PXB) · Standard bar MLB: · narrow kerf · 95TXL chain PXB: · regular kerf · 20BPX/LGX/LPX chain | MLB: 13″(56) 15″(64) 16″(66 m) 18″(72 m) PXB: 18″(72 g,p) 20″(78 g,p) |
PowerCut™ (EXL/RNB) · Replaceable nose · Solid body · 20BPX/LGX/LPX chain | EXL: 16″(66 b) 20″(78 b,p) RNB: 16″(66 b) 20″(78 b,p) |
SpeedCut™ (TXLB/TXLG) · Narrow kerf · Up to 55cc saws · TXLB small nose · TXLG large nose · 95TXL chain | TXLB: 13″(56) 15″(64) 16″(66 m)(b&c) 18″(72 m)(b&c) 20″(78 m) TXLG: 15″(64) 16″(66 m) 18″(72 m) 20″(78 m) |
VersaCut™ (VXLG) · Lightweight pro bar · Large nose · 20BPX/LGX/LPX chain | 16″(66 b) 18″(72 g,p) 20″(78 g,p) |
*links to Amazon: bar(chain)(b&c) | (b)BPX,(g)LGX, (p)LPX,(m)M |
OREGON BARS K095 mount .325″ pitch .058″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (PXB) · Standard bar · PXB small nose · SFG large nose · 21BPX/LGX/LPX chain | PXB: 15″(64 b,g,p) 16″(66 j,g,p) 18″(72 j,g,p) 20″(78 j,g,p) SFG: 18″(72 j,g,p) |
ControlCut™ (PXLB) · Lightweight pro bar · Low-kickback nose · 21BPX/LGX/LPX chain | 13″(56 b) 15″(64 b,g,p) 16″(66 j,g,p) 18″(72 j,g,p) |
PowerCut™ (EXLB/RNB) · Replaceable nose · Solid body · Large nose · 21BPX/LGX/LPX chain | EXLB: 15″(64 b,g,p) 16″(66 j,g,p) 18″(72 j,g,p) 20″(78 j,g,p) RNB: 13″(56b) 15″(64b,g,p) 16″(66j,g,p) 18″(72j,g,p) 20″(78j,g,p) |
VersaCut™ (VXLG) · Lightweight pro bar · Large nose · 21BPX/LGX/LPX chain | 15″(64b,g,p) 16″(66j,g,p)(b&c) 18″(72j,g,p) 20″(78j,g,p)(b&c) |
*links to Amazon: bar(chain)(b&c) | (b)BPX,(g)LGX, (j)BPX, (p)LPX |
3/8″ pitch (K095)
The K095 mount, 3/8″ pitch Oregon bars fit a few popular Husqvarna models: 455 Rancher, 460 Rancher and 555. These bars are available in .050″ and .058″ gauge (both work) and lengths from 16″ up to 28″. (See original Husqvarna bars)
NB. Though compatible, the longest bars in this table may be too heavy for your saw to run – please check my bar length vs. cc guidelines.
OREGON BARS K095 mount 3/8″ pitch .050″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (PXD/SFH) · Standard bar · PXD small nose · SFH large nose · 72V chain | PXD: 16″(59) SFH: 18″(68) 20″(72)(b&c1,2) |
DuraCut™ (ATM/DXL) · hard nose · tough, hard-wearing · dirty conditions | ATM: 20″(72c,d,e,g,j) DXL: 20″(72c,d,e,g,j) |
PowerCut™ (EXL/RND) · Replaceable nose · Solid body · Large nose · 72xx chain | EXL: 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) 28″(93c,j) RND: 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) 28″(93c,j) |
VersaCut™ (VXLH) · Lightweight pro bar · Large nose · 72DPX chain | 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) |
*links to Amazon: bar(chain)(b&c) | (c)CJ,(d)D,(e)EXL, (g)LGX,(j)EXJ |
OREGON BARS K095 mount 3/8″ pitch .058″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (SFH) · Standard bar · SFH large nose | 18″(68g,j,l) 20″(72g,j,l) |
DuraCut™ (ATM) · Hard nose · Tough, hard-wearing · Dirty conditions | 16″(60) 18″(68g,j,l) 20″(72g,j,l) |
DuraCut™ XD (DXLM) · Hard nose · Tough, hard-wearing · Dirty conditions | 16″(60) 18″(68g,j,l) 20″(72g,j,l) 22″(76) 24″(80) |
PowerCut™ (EXLD/RND) · Replaceable nose · Solid body · Large nose · 73E/J/L chain | EXLD: 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) RND: 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) |
VersaCut™ (SLH/VXLH) · Lightweight pro bar · Large nose · 73E/J/L chain | SLH: 18″(68g,j,l) VXLH: 15″(56) 16″(60) 18″(64) 20″(72g,j,l) |
*links to Amazon: bar(chain)(b&c) | (g)LGX,(j)EXJ, (l)EXL |
D009 for Husqvarna Large
Most Husqvarna saws above 60cc take Oregon bars with the D009 mount. These bars come in two pitches: 3/8″ and .404″ – the latter goes for 3120 XP and 3/8″ for all others.
3/8″ pitch (D009)
The D009 mount, 3/8″ pitch Oregon bars fit most medium-to-large Husqvarna saws between 60cc and 100cc. Both .050″ and .058″ gauge bar models are available; both work as long as the chain and bar gauge match. The bars are listed in the two tables below. (See original Husqvarna bars)
NB. Though compatible, the longest bars in this table may be too heavy for your saw to run – please check my bar length vs. cc guidelines.
OREGON BARS D009 mount 3/8″ pitch .050″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (SFH) · Standard bar | 20″(72c,d,e,g,j) 24″(84e,j,c) |
DuraCut™ (ATM/DXLM) · Hard nose · Tough, hard-wearing · Dirty conditions | ATM: 16″(60e,l) 20″(72c,d,e,g,j) 24″(84e,j,c) DXLM: 20″(72c,d,e,g,j) 24″(84e,j,c) |
PowerCut™ (EXLD/RND) · Replaceable nose · Solid body · Large nose · 72E/J/L chain EXLD: 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) 28″(93c,j) 30″(98) 32″(105e,j) | RND: 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) 28″(93c,j) 30″(98) 32″(105e,j) |
VersaCut™ (VXLH) · Light pro bar · Large nose · 72DPX chain | 16″(60e,l) 18″(68d,e,j,l) 20″(72c,d,e,g,j) 24″(84e,j,c) |
*links to Amazon: bar(chain)(b&c) | (c)CJ,(d)D,(e)EXL, (g)LGX,(j)EXJ |
OREGON BARS D009 mount 3/8″ pitch .058″ gauge | Lengths in. (DL)* |
---|---|
AdvanceCut™ (SFH) · Standard bar | 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) |
DuraCut™ (ATM/DXLM) · Hard nose · Tough, hard-wearing · Dirty conditions ATM: 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) 28″(92) | DXLM: 16″(60) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) 28″(92) 30″(98) |
PowerCut™ (EXLD/RND) · Replaceable nose · Solid body · Large nose · 73E/J/L chain RND: 13″(52) 15″(56) 16″(60) 17″(64) 18″(68g,j,l) 20″(72g,j,l) 22″(76) 24″(84j,l) | EXLD: 13″(52) 15″(56) 16″(60) 17″(64) 18″(68g,j,l) 22″(76) 24″(84j,l) 26″(89) 28″(92) 30″(102) 32″(105) 36″(115) |
VersaCut™ (VXLH) · Lightweight pro bar · Large nose · 73E/J/L chain | 15″(56) 16″(60) 17″(64) 18″(68g,j,l) 20″(72g,j,l) 24″(84j,l) |
*links to Amazon: bar(chain)(b&c) | (g)LGX,(j)EXJ, (l)EXL |
.404″ pitch (D009)
Unlike any other Husqvarna saw, the 3120 XP takes a .404″ pitch chain – the longest, now almost obsolete pitch. Fortunately, Oregon makes quite a few D009 mount, .404″ pitch bars that fit the 3120 XP, all in .063″ gauge. (See original Husqvarna bars)
OREGON BARS D009 mount .404″ pitch | Lengths in. (DL) | |
---|---|---|
.404″ – .063″: | ||
DuraCut™ (ATL) · Hard nose · Tough, hard-wearing · Dirty conditions | 28″(84) 30″(92) 34″(100) | |
DuraCut™ XD (New models) · Hard nose · Tough, hard-wearing · Dirty conditions | DXLL: 24″(76) 28″(84) 30″(92) 34″(100) 36″(104) | DXLM: 24″(76) 28″(84) |
PowerCut™ · Replaceable nose · Solid body · Large nose | EXLF: 24″(76) 36″(104) 42″(122) | RNF: 24″(76) 36″(104) 42″(122) |