Basic Information
HUSQVARNA T540 XP | ||
---|---|---|
Model name: | T540 | XP |
Engine size: | 37.7 | cc |
Power output: | 2.40 1.79 | hp kW |
Weight (powerhead): | 8.6 3.9 | lb. kg |
Bar length: | 12″…16″ | |
Chain pitch: | 3/8″ Mini | |
Bar mount: | Small |
Compatible Bars
Husqvarna original bars
The Husqvarna T540 XP® takes all Husqvarna guide bars with the Small mount, 3/8 Mini pitch and .050″ gauge. The .043″ gauge HL-186 bars should also fit though not specified for the saw. The compatible original bars are listed in the table below. Recommended bar lengths are 12″ to 16″, compatible bars outside this range greyed out.
HUSQVARNA BARS Small mount – 3/8″ Mini pitch | Lengths in. (DL) |
---|---|
.050″ gauge: | |
HL-280 · Laminated · S93G chain | S93G 10″ (40) 12″ (45) 14″ (52) 16″ (56) |
.043″ gauge (not spec): | |
HL-186 · Laminated · Narrow kerf (Pixel) · H38 chain | H38 12″ (45) 14″ (52) 16″ (56) |
Oregon bars
Oregon makes Husqvarna T540 XP® -compatible guide bars in the A095 mount, 3/8 Low Profile pitch and both .043″ and .050″ gauge. Compatible bars are listed in the table below.
OREGON BARS A095 mount 3/8″LP pitch | Lengths in. (DL) |
---|---|
3/8″LP – .043″: | 90PX |
Single Rivet (MLEA) ∙ Affordable ∙ 90PX chain | 12″ (45) |
3/8″LP – .050″: | 91PX |
AdvanceCut™ (SXE) (recommended) ∙ Tougher nose ∙ 91PX chain | 12″ (45) 14″ (52) 16″ (56) |
Single Rivet (SDE) ∙ Affordable ∙ 91PX chain | 12″ (45) 14″ (52) 16″ (56) 18″ (60) |