Basic Information
STIHL 023 | ||
---|---|---|
Model name: | 023 | |
Engine size: | 40.2 | cc |
Power output: | N/A N/A | hp kW |
Weight (powerhead): | 10.1 4.6 | lb. kg |
Bar length: | 12″…18″ | |
Chain pitch: | 3/8″P (.325″) | |
Bar mount: | 3005 |
Compatible Bars
Compatible original Stihl guide bars and Oregon replacement bars are listed in tables below. A link to the bar, compatible Stihl and Oregon chains and a bar&chain combo in Amazon are included whenever possible. (Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.)
Stihl original bars (3/8P)
When fitted with a 3/8P drive sprocket, the Stihl 023 takes all Stihl guide bars with the Small 3005 mount and 3/8P (Picco) pitch and .050″ gauge (63 PM3 chain). Also .043″ gauge bars technically fit, but the power of the 023 probably exceeds the 2.0hp limit of the compatible 61 PMM3 chain. The linked Oregon chains (90PX) are specified for saws up to 42cc, though, and OK for the 023.
The compatible original bars are listed below. Recommended bar lengths are 12″ to 18″, compatible bars outside this range greyed out.
STIHL BARS 3005 mount 3/8″ Picco – .050″ | Length in(DL) |
---|---|
Rollomatic E Standard · Laminated · Sprocket nose · 63 xx chain | 12″(44)pxl,s 14″(50 PM,PS)p,l,v 16″(55 PS)l,v 18″(61) |
Rollomatic E Light · Lightweight · Laminated · 63 xx chain | 12″(44)pxl,s 14″(50 PM,PS)p,l,v 16″(55 PS)l,v |
*links to Amazon: | bar(ch.n)Oreg.ch. (l)PXL (p,s)PX (v)VXL |
STIHL BARS 3005 mount 3/8″ Picco – .043″ | Length in(DL)* |
---|---|
Rollomatic E Standard · Laminated · Sprocket nose | (61PMM3 not spec.) 12″ 14″ 16″ |
Rollomatic E Mini · Lightweight · Small-nose · Laminated | 12″ 14″ 16″ |
Rollomatic E Mini Light · Lightweight · Laminated · Small-nose | 10″(39)px 12″ 14″ |
*links to Amazon: | bar(ch.n)Oreg.ch. (px,r)PX |
Stihl original bars (.325″)
Optionally, the Stihl 023 is also available with a .325″ drive sprocket. This configuration takes 3005 mount, .325″ pitch bars in .050″ or .063″ gauge listed below.
STIHL BARS 3005 mount .325″ pitch | Length in(DL)* |
---|---|
.325″ – .050″ | |
Rollomatic E Standard · Laminated · Sprocket nose | 16″(60) 18″(68)LGX |
.325″ – .063″ | |
Rollomatic E Standard · Laminated · Sprocket nose | 14″(56) 16″(62)BPX 18″(68x2,3 RS,x2) |
Rollomatic E Standard WOOD BOSS | 16″(60) 18″(68x2 RS,x2)b,p |
*links to Amazon: | bar(ch.n)Oreg.ch. |
Oregon bars (3/8P)
In the default 3/8P configuration, the Stihl 023 takes Oregon bars in the A074 mount and 3/8P pitch and both .043″ and .050″ gauge. The compatible Oregon bar models are listed below.
OREGON A074 mount (for Stihl 3005) 3/8″LP – .043″ | Lengths in. (DL)* |
---|---|
Single Rivet (MLE) ∙ Affordable ∙ 90PX chain | 12″(44 r)(bar) 14″(50) 16″(55) |
*links to Amazon: | b&c(chain)(bar) (r)R(90PX) |
OREGON A074 mount (for Stihl 3005) 3/8″LP – .050″ | Lengths in. (DL)* |
---|---|
Single Rivet (SDE) ∙ Affordable ∙ 91PX chain | 12″(44 l) 14″,2(50 l,v)(bar) 16″,2 (55 v) |
AdvanceCut™ (SXE) ∙ Tougher nose ∙ 91PX chain | 12″(44 l) 14″(50 l,v) 16″(55 v) |
*links to Amazon: | b&c(chain)(bar) (l)PXL,(v)VXL |
Oregon bars (.325″)
The optional .325″ pitch configuration of the saw takes Oregon bars in the A074 mount, .325″ pitch and either .050″ or .063″ gauge: