Basic Information
STIHL 025 | ||
---|---|---|
Model name: | 025 | |
Engine size: | 45.4 | cc |
Power output: | N/A N/A | hp kW |
Weight (powerhead): | 10.1 4.6 | lb. kg |
Bar length: | 12″…18″ | |
Chain pitch: | 3/8″P (.325″) | |
Bar mount: | 3005 |
Compatible Bars
Compatible original Stihl guide bars and Oregon replacement bars are listed in tables below. A link to the bar, compatible Stihl and Oregon chains and a bar&chain combo in Amazon are included whenever possible. (Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.)
Stihl original bars (3/8P)
The Stihl 025 takes all Stihl guide bars with the Small 3005 mount and 3/8P (Picco) pitch and .050″ gauge (63 PM3 chain). Also .043″ gauge bars technically fit (w. 61 PMM3 chain), but are not specced for the 025 power level. The compatible original bars are listed below. Recommended bar lengths are 12″ to 18″, compatible bars outside this range greyed out.
STIHL BARS 3005 mount 3/8″ Picco – .050″ | Length in(DL) |
---|---|
Rollomatic E Standard · Laminated · Sprocket nose · 63 xx chain | 12″(44)pxl,s 14″(50 PM,PS)p,l,v 16″(55 PS)l,v 18″(61) |
Rollomatic E Light · Lightweight · Laminated · 63 xx chain | 12″(44)pxl,s 14″(50 PM,PS)p,l,v 16″(55 PS)l,v |
*links to Amazon: | bar(ch.n)Oreg.ch. (l)PXL (p,s)PX (v)VXL |
Oregon bars (3/8P)
In the default 3/8P configuration, the Stihl 025 would technically take all Oregon bars in the A074 mount and 3/8P pitch and either .043″ or .050″ gauge. However, the compatible 90PX and 91PX Oregon chains are specified for only up to 42 cc saws and slightly under-specified for the 45cc of the 025:
OREGON A074 mount (for Stihl 3005) 3/8″LP – .050″ | Lengths in. (DL)* |
---|---|
Single Rivet (SDE) ∙ Affordable ∙ 91PX chain (spec limit) | 12″(44 l) 14″,2(50 l,v)(bar) 16″,2 (55 v) |
AdvanceCut™ (SXE) ∙ Tougher nose ∙ 91PX chain (spec limit) | 12″(44 l) 14″(50 l,v) 16″(55 v) |
*links to Amazon: | b&c(chain)(bar) (l)PXL,(v)VXL |
Stihl original bars (.325″)
Optionally, the Stihl 025 is also available with a .325″ drive sprocket. This configuration takes 3005 mount, .325″ pitch bars in .050″ or .063″ gauge listed below.
STIHL BARS 3005 mount .325″ pitch | Length in(DL)* |
---|---|
.325″ – .050″ | |
Rollomatic E Standard · Laminated · Sprocket nose | 16″(60) 18″(68)LGX |
.325″ – .063″ | |
Rollomatic E Standard · Laminated · Sprocket nose | 14″(56) 16″(62)BPX 18″(68x2,3 RS,x2) |
Rollomatic E Standard WOOD BOSS | 16″(60) 18″(68x2 RS,x2)b,p |
*links to Amazon: | bar(ch.n)Oreg.ch. |
Oregon bars (.325″)
The optional .325″ pitch configuration of the saw takes Oregon bars in the A074 mount, .325″ pitch and either .050″ or .063″ gauge: