Basic Information
STIHL MS 200 | ||
---|---|---|
Model name: | MS 200 | |
Engine size: | 35.2 | cc |
Power output: | N/A N/A | hp kW |
Weight (powerhead): | 8.4 3.8 | lb. kg |
Bar length: | 12″…18″ | |
Chain pitch: | 3/8″P | |
Bar mount: | 3005 |
Compatible Bars
Stihl original bars
The MS 200 takes all Stihl guide bars with the small 3005 mount, 3/8P (Picco) pitch and .050″ gauge (63 PM3 chain). Also .043″ gauge bars fit technically, but the .043″ chain (61 PMM3) is probably not specced for power of the MS 200. The compatible original bars are listed in the table below. Recommended bar lengths are 12″ to 18″, compatible bars outside this range in parentheses.
STIHL 3005 mount 3/8P pitch | Length [in.] | Chain (rec.) |
---|---|---|
.050” gauge: | 63 PM3 | |
Rollomatic E Standard | 12 in 14 in 16 in 18 in | 44 50 55 61 |
Rollomatic E Light | 12 in 14 in 16 in | 44 50 55 |
.043” gauge: (not specified) | 61 PMM3 | |
Rollomatic E Mini | 12 in 14 in 16 in | 44 50 55 |
Rollomatic E Standard | 14 in 16 in | 50 55 |
Rollomatic E Mini Light | (10 in) 12 in 14 in | 39 44 50 |
Oregon bars
Oregon makes MS 200 -compatible guide bars in the A074 mount, 3/8P pitch and both .043″ and .050″ gauge. The Oregon .043″ narrow kerf chain (90PX) is specified for saws up to 42cc and OK for the MS 200.
OREGON A074 mount 3/8P pitch | Length [in.] | Chain (rec.) |
---|---|---|
.043” gauge: | 90PX | |
Single Rivet MLE | 12 in 14 in 16 in | 90PX044G 90PX050G 90PX055G |
.050” gauge: | 91PX | |
AdvanceCut™ SXE | 12 in 14 in 16 in | 91PX044G 91PX050G 91PX055G |
Single Rivet SDE | 12 in 14 in 16 in | 91PX044G 91PX050G 91PX055G |