Basic Information
STIHL MSE 141 | ||
---|---|---|
Model name: | MSE 141 | |
Engine size: | 11.6 | A |
Power output: | 1.9 1.4 | hp kW |
Weight (powerhead): | 6.4 2.9 | lb. kg |
Bar length: | 10″…16″ | |
Chain pitch: | 1/4″P (3/8P) | |
Bar mount: | 3005 |
Compatible Bars
Compatible original Stihl guide bars and Oregon replacement bars are listed in tables below. A link to the bar, compatible Stihl and Oregon chains and a bar&chain combo in Amazon are included whenever possible. (Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.)
Stihl original bars (1/4P)
When fitted with a 1/4P pitch drive sprocket, the MSE 141 takes all Stihl guide bars with the Small 3005 mount, 1/4P pitch and .043″ gauge. The compatible original 1/4P bars are listed in the table below. The recommended 1/4P bar lengths are 10″…14″; other lengths greyed out.
STIHL BARS 3005 mount 1/4P – .043″ | Length in(DL)* |
---|---|
Carving E · Laminated · Very narrow nose · Hard nose | 71 PM3 12″(64) |
Rollomatic E Mini · Lightweight | 10″(56) 12″(65) 14″(72) |
*(links to Amazon) | bar(chain) |
Stihl original bars (3/8P)
When fitted with a 3/8P pitch drive sprocket, the MSE 141 takes all Stihl guide bars with the Small 3005 mount, 3/8P pitch and .043″ gauge. The compatible original bars are listed in the table below. The recommended 3/8P bar lengths are 12″…16″; other lengths greyed out.
STIHL BARS 3005 mount 3/8″ Picco – .043″ | Length in(DL)* |
---|---|
Rollomatic E Standard · Laminated · Sprocket nose | 61PMM3 12″ 14″(50) 16″(55 x3) |
Rollomatic E Mini · Lightweight · Small-nose · Laminated | 12″(44x5)r 14″(50) 16″(55x3)px |
Rollomatic E Mini Light · Lightweight · Laminated · Small-nose | 10″(39)px 12″(44x5)r 14″(50) |
*links to Amazon: | bar(ch.n)Oreg.ch. (px,r)PX |
Oregon bars (1/4P)
Oregon does not offer MSE 141 -compatible guide bars for 1/4P pitch. The A074 mount would fit, but there are no 1/4P pitch Oregon bars with this mount.
Oregon bars (3/8P)
When fitted with a 3/8P drive sprocket, the MSE 141 takes Oregon bars with the A074 mount, 3/8P pitch and .043″ gauge. The compatible Oregon bars are listed below.