Tsumura offers a number of guide bar models for Stihl chainsaws in the Medium (3003) and Large (3002) Stihl bar mounts. Although fewer than those for Husqvarna, the Tsumura models are a valuable addition to the extensive original Stihl bar selection. Tsumura bars are equal or higher quality than Stihl originals (depending on the model) and often have better online availability.
The tables in this post list the Stihl-compatible Tsumura bar models that I could find available online. The bars are listed below by mount, pitch and gauge and the Stihl saw models that take each are shortly indicated. I have also included a link to Amazon (affiliate) to the bar, compatible Oregon chains and a bar&chain combo whenever possible. (Workshoppist.com is an Amazon Associate. As an Amazon Associate we earn from qualifying purchases.)
The Tsumura Stihl selection is quite limited and no bars are offered for Stihl Small mount (3005) saws. For more options, please check my Stihl bar data page and an earlier post on Oregon bars for Stihl.
D025 mount (Stihl Medium 3003)
.325″ pitch (3003)
The D025 mount, .325″ pitch Tsumura bars fit a few popular medium-powered 3003 mount Stihls: MS 261, MS 271 Farm Boss and MS 291, as well as older models 024…028. Tsumura offers lengths from 16″ to 20″ and only .063″ gauge. (See original Stihl bars, Oregon bars)
TSUMURA BARS Stihl Med (D025) .325″ – .063″ | Length in(DL)* | Prod. No. |
---|---|---|
Pro Solid ∙Solid ∙SKS-51 steel ∙RSN | 16″(67 l,p) 18″(74 l,g,p) 20″(81 l,g) | 206SR2 207SR2 208SR2 |
*links to Amazon: bar(chain) | (l)BPX,(g)LGX, (p)LPX |
3/8″ pitch (3003)
The D025 mount 3/8″ pitch Tsumura bars fit most medium-to-high-power Stihl gas saws with model number 300 or larger (MS 311, 391, 362, 462, 660, 661, 500i), the largest electric model (MSE 250), and old models in the range 029…066.
These bars are available in .050″ and .063″ gauge and in lengths from 16″ up to 36″. (See original Stihl bars, Oregon bars)
NB. Though compatible, the longest bars in the tables may be too heavy for your saw to run – please check my bar length vs. cc guidelines.
TSUMURA BARS Stihl Med (D025) 3/8″ – .050″ | Length in(DL)* | Prod. No. |
---|---|---|
Pro Solid ∙Solid ∙SKS-51 steel ∙RSN | 16″(60e,l) 18″(66 d,l) 23″(76) | 200FV4 201FV4 203FV4 |
Light ∙Solid, milled-out ∙20% lighter ∙RSN | 16″(60e,l) 18″(66 d,l) 23″(76) | 200FK4 201FK4 203FK4 |
*links to Amazon: bar(chain) | (e)LPX (l)EXL (d)V |
TSUMURA BARS Stihl Med (D025) 3/8″ – .063″ | Length in(DL)* | Prod. No. |
---|---|---|
Pro Solid ∙Solid ∙SKS-51 steel ∙RSN | 16″(60) 18″(66) 20″(72 g,j,l) 23″(76) 24″(84 g) 36″(114) | 206FV4 207FV4 208FV4 209FV4 210FV4 238FV4 |
Light ∙Solid, milled-out ∙20% lighter ∙RSN | 16″(60) 18″(66) 20″(72 g,j,l) 23″(76) 25″(84 g) 36″(114) | 206FK4 207FK4 208FK4 209FK4 210FK4 238FK4 |
*links to Amazon: bar(chain) | (g)LGX (j)EXJ (l)EXL |
E031 mount (Stihl Large 3002)
.404″ pitch (E031)
Tsumura bars in the E031 mount and the long .404″ pitch fit the largest Stihl saws with the 3002 bar mount. These include MS 880, the updated MS 881 and some older models. (See original Stihl bars, Oregon bars)